nobby
26-08-2015, 11:02 PM
anasonic minas a4 200w motors, 'I think 60mm bolt holes to squares
to an isel fb2
motors foot is 6-7mm
any suggestions ??
I am in London
I have some 15mm aluminium plate
would like them sexied up if possible on the lower plate, maybe cove bit what ever that's called and knock the edges off
oops, just ordered the motor couplings 11mm to 1/4 and could only get them 42mm long
so the lower plate needs to be 20mm - I have some of that too.
I can't slow my motor down enough - don't know what bit to use.
don't know depth per pass
don't know the grade of allominoominoom I have
can't sexy them up with cove and 45 knocks
take 3
just two 20mm plates now, found some smaller couplers
http://img.photobucket.com/albums/v222/pantswagen/motor%20mount_zps8gicxbph.jpg (http://smg.photobucket.com/user/pantswagen/media/motor%20mount_zps8gicxbph.jpg.html)
to an isel fb2
motors foot is 6-7mm
any suggestions ??
I am in London
I have some 15mm aluminium plate
would like them sexied up if possible on the lower plate, maybe cove bit what ever that's called and knock the edges off
oops, just ordered the motor couplings 11mm to 1/4 and could only get them 42mm long
so the lower plate needs to be 20mm - I have some of that too.
I can't slow my motor down enough - don't know what bit to use.
don't know depth per pass
don't know the grade of allominoominoom I have
can't sexy them up with cove and 45 knocks
take 3
just two 20mm plates now, found some smaller couplers
http://img.photobucket.com/albums/v222/pantswagen/motor%20mount_zps8gicxbph.jpg (http://smg.photobucket.com/user/pantswagen/media/motor%20mount_zps8gicxbph.jpg.html)