PDA

View Full Version : Steppers and drivers



Davidh
12-06-2009, 06:24 PM
I am in UK and not willing to import from outside Europe.

What steppers and drivers should I buy to make my machine run like this?

YouTube - MDA Precision X2-X5 CNC Controller

Thanks

Gary
12-06-2009, 06:39 PM
If you have an X2 then our SY60 motors are a good choice for X and Y and Z.

If it is a bigger machine like the X3 use the same for X and y and a larger nema 34 like the SY85STH80 or 118.

I have 2 X SY60 and a SY85STH118 on my X3 super.



I am in UK and not willing to import from outside Europe.

What steppers and drivers should I buy to make my machine run like this?

YouTube - MDA Precision X2-X5 CNC Controller (http://www.youtube.com/watch?v=2I966WNS_uM)

Thanks

Davidh
12-06-2009, 06:57 PM
"SY60 motors are a good choice"

Thanks G.

So wouldn't that be the PM542 Microstepping Driver to match?

Edit..should have said it is the Wabeco mill

Gary
12-06-2009, 06:59 PM
Yes, the SY60 runs at 2.1A in series and 4.2A in parallel, so this driver has enough current to run in either wiring configs.


"SY60 motors are a good choice"

Thanks G.

So wouldn't that be the PM542 Microstepping Driver to match?

Edit..should have said it is the Wabeco mill