PDA

View Full Version : Nice machine ideas!



routercnc
01-09-2015, 10:09 PM
I know this is a commercial machine but there are some nice ideas here for a 3 axis machine:

http://uk.dmgmori.com/blob/172034/d7bd0ec76e8ecc8c4b672d1fd67df02a/pm0uk13-nmv5080-pdf-data.pdf

This for example on page 7:
15991

Although some of the ideas are already found in machines built by members:
Raised X rails - as seen many machines on this site
Linear rails onto ground surfaces - with small side locator pins (as fvfdrums rails)
Driven through centre of gravity, twin ballscrew, even on Z axis (as Sylavski)
Box in box Z axis and double rail Y axis (as Jonathan's machine)

Got me thinking about a new machine . . . :whistle: