PDA

View Full Version : Best ebook for CNC Milling Setting and/or Tooling… pleeeease heeeelp!!!!!



hoezap
21-09-2015, 08:56 PM
Hello

Thank you for entering

I am a CNC Machinist and I am desperately looking for a good e-book regarding Setting and/or tooling with many hints and tips to be very productive on a CNC milling centre
(I do know already about Machinery’s Handbook and I am going to wait for the 30th edition which will come out in about 4 months)

Thank you in advance for your help

komatias
22-09-2015, 12:38 PM
I have not found e-books that do the whole thing justice. What I do however find very good are tool manufacturer's catalogues (WNT, Coromant etc) and the "CNC programming handbook" by Peter Schmidt.

Then you will probably need to get specialised with books on fixturing for GD&T or fixturing for production

Either way, brand new these textbooks are not cheap so see if you can get them used.

hoezap
22-09-2015, 08:54 PM
I have not found e-books that do the whole thing justice. What I do however find very good are tool manufacturer's catalogues (WNT, Coromant etc) and the "CNC programming handbook" by Peter Schmidt.

Then you will probably need to get specialised with books on fixturing for GD&T or fixturing for production

Either way, brand new these textbooks are not cheap so see if you can get them used.

Thank you very much indeed!