PDA

View Full Version : WANTED: WANTED - Deford Triac ATC In/Out cylinder



jamesgates1000
26-10-2015, 11:30 AM
I have pneumatic cylinder on on milling machine tool changer that has a leaking internal seal. It works on the outward stroke but air exhausts out of the back valve on the return stroke.


Does anyone know if I could replace the internal seal on this cylinder?


If not does anyone have a spare lying around?


The cylinder is a Joucomatic Isoclair 435 50 438 c 25 A 150 (P max 140psi)

Chaz
26-10-2015, 10:10 PM
I have pneumatic cylinder on on milling machine tool changer that has a leaking internal seal. It works on the outward stroke but air exhausts out of the back valve on the return stroke.


Does anyone know if I could replace the internal seal on this cylinder?


If not does anyone have a spare lying around?


The cylinder is a Joucomatic Isoclair 435 50 438 c 25 A 150 (P max 140psi)

If you dont come right, I can point you to someone that can help. I bought a missing actuator for my Denford from these guys, were helpful and very good.

jamesgates1000
27-10-2015, 07:40 AM
Hi Chaz, thanks I have been quoted £70 delivered, was yours source any cheaper? Thanks

Chaz
27-10-2015, 08:42 AM
Hi Chaz, thanks I have been quoted £70 delivered, was yours source any cheaper? Thanks

This is what I paid. My actuator is not 'soft stopping', so doesnt have the adjustment at the end of the travel but still works none the less.

1off - 25mm Bore x 160mm Stroke D/Acting Pneumatic Cylinder @ £40.39

1off - 3 Station Solenoid Valve Manifold @ £24.71

3off - 1/4"bsp 5/2 Solenoid/Spring Valve 110v c/w Led DinPlug @ £27.00 each

(*The easiset option for the 3 way valve is to use a 5 way and blank one of the outlets)

4off - 1/4"bsp x 6mm Straight Adaptor @ £0.65 each (Manifold Inlet & Vent / Outlet for 3 way Valve)

4off - 1/4"bsp x 4mm Straight Adaptor @ £0.65 each (Outlets for 5 way Valves)

4off - 1/4"bsp Blanking Plug @ £0.60 each (1off for 3 way valve / 3off for blanking one side of valve manifold)

1off - Carriage @ £10.00

Total @ £163.70 + Vat

The supplier details are:-

Shelley Automation Ltd
Block One
Nortonthorpe Mills
Scissett
Huddersfield
HD8 9LA
Tel: 01484 860920 (tel:01484%20860920)
Fax: 01484 860672 (tel:01484%20860672)
Email: [email protected]

VAT: 694 8526 78

jamesgates1000
17-11-2015, 01:08 PM
Thanks for the replies.
Went to my local pneumatic supplier in Bristol(Harrier Pneumatics) and got a Parker PIA-5025MS-0150 as a direct replacement for £64.
ATC is working fine now.