PDA

View Full Version : WANTED: Dahlgren dsc2000 black box to drive Gryphon suregrave router



relayman
09-11-2015, 03:17 PM
Hi Thank you for reading this plea for help.
I am looking to buy a Dahlgren dsc2000 black box to drive a Gryphon Suregrave router.
From left to right on the front it has 7 tactile push switches lcd display, 3 variable pots, 1 stop tactile push switch.

Here's hoping

Dave

DiGi5670
16-09-2017, 10:49 PM
are you still in need of this, I am in the middle of a conversion and I am eventually replacing the dsc2000 with a mach 3 setup. let me know thanks Paul

relayman
19-09-2017, 08:48 AM
Hi Paul




Yes I would like to buy the black box.

I now know that the Hi Drive 1 and Hi Drive 2

will do the same job as the black box.

Thank you for replying to my plea of help




Dave

DiGi5670
19-09-2017, 11:27 PM
I'm not sure of what to ask for the Dahlgren dsc2000 to be fare, its hard to find any information on this, I have a manual of sorts and a bit of software that came with the machine but once I convert it to mach3 I will have no use for any of it. If you could help out on a price of what its worth then that would be brilliant otherwise I will have to look into it.

if anyone else knows of the value of this black box dsc2000 please let me know, many thanks

DiGi5670
22-09-2017, 03:35 PM
I have been contacted by 2 companies interested in the controller any chance you have a price in mind of offering, I'm stuck until someone comes up with a figure, thanks Paul

relayman
22-09-2017, 03:39 PM
Hi Paul
Inside the black box there is the following:-
286 computer mother board
3 * 24v 3 amp stepper motor drivers
24v 10 amp power supply.
Looking on ebay brand new is;-


UK CNC Single Axis 4A TB6600 2/4 Phase Hybrid Stepper Motor Drivers Controller
£8.24p each 24.72p for 3.

24v dc 10 amp power supply

DC 12V 24V 5V 10A 12.5A 15A 20A 30A Universal Regulated Switching Power Supply
UK Stock! 5V 12V 24V !3A 5A 8.5A 12.5A 30A ! 10W-400W!

Power Supply £12.23

£25 and £15 = £40 + p&p

Does that seem ok ?

Dave

relayman
22-09-2017, 03:46 PM
best idea is contact any one with interest and put it on ebay
DAVE

BikerDaily
27-01-2023, 12:28 AM
What is a mach3 setup

relayman
27-01-2023, 02:57 AM
Mach 3 is a software programme that will do the brains of what needs doing in the sense of moving the three stepper motors to what has been programmed in Mach three.
This is then fed into a drive system that will talk to your thee stepper motors.

BikerDaily
28-01-2023, 12:18 PM
I’m a novice here, how exactly are you running mach3. Is it a graphics package?

BikerDaily
31-01-2023, 06:11 PM
Relayman
So we are wondering if the fault with our system is the Dahlgreen. Could it be firmware? Or RAM memory?
Our machine sometimes prints letters/ graphics in completely wrong place. It worked perfectly and now does random cuts, wasting the material.
We’ve checked data downloaded and the file seems to be correct
Have you any ideas why this might be?
Brian

Kova
01-12-2023, 03:13 PM
Hi Brian,

We have a DSC 2000 that is showing the same symptoms. Did you ever find a remedy to the issues you were having with yours?

Thanks
Gary

BikerDaily
01-12-2023, 11:18 PM
Hi Brian,

We have a DSC 2000 that is showing the same symptoms. Did you ever find a remedy to the issues you were having with yours?

Thanks
Gary

No progress. Company in Ireland will look at it for £200, then there would be fox costs. We would need to post Scotland to Ireland etc . No guarantees. As this is a school it’s risky.
Our latest thoughts were could we build arduino project to do the same job?

It’s a real pain. Valuable machinery rusting away!

Kova
08-12-2023, 11:09 AM
No progress. Company in Ireland will look at it for £200, then there would be fox costs. We would need to post Scotland to Ireland etc . No guarantees. As this is a school it’s risky.
Our latest thoughts were could we build arduino project to do the same job?

It’s a real pain. Valuable machinery rusting away!

Hi thanks for your reply, Its hard to find any info on these machines, at least in regards to troubleshooting! Unfortunately my arduino skills run to making a led flash on and off at an interval of my choosing :encouragement:

If I do come across a solution I'll be sure to let you know!

Cheers

Gary