PDA

View Full Version : VFD/Spindle wiring help



Davo242
11-12-2015, 07:50 PM
Newbie from Northern Ireland.
Hi there I was wondering if anyone could help me with the wiring of a spindle I got from eBay.

Clive S
13-12-2015, 11:42 AM
Newbie from Northern Ireland.
Hi there I was wondering if anyone could help me with the wiring of a spindle I got from eBay.What is it you need to know

routercnc
13-12-2015, 01:19 PM
is this a water cooled Chinese spindle or similar? Did you also get the VFD / invertor? This is the power supply to the spindle
You also need shielded cable with at least 3 cables inside
You also need a power cable from the mains to the invertor. Some people also put a mains filter in between.

Show us what you have and there will be plenty of help

Davo242
28-12-2015, 09:33 PM
1692516926 sorry for delay on getting back. This is the inverter and the bob board