View Full Version : NEW MEMBER: New Member with Wabeco CC-F1410HS

GT Mechanical
02-01-2016, 05:38 PM
Hi just bought a Wabeco CC-F1410 HS. beautiful machine but the NCCAD7.5 pro is unusable, I have purchased an upgrade to NCCAD9a which is a huge improvement. But struggling to activate U-axis has anyone had any experience with this version. I would appreciate any help!

07-01-2016, 09:15 PM
Hi and welcome to the forum :) I'm guessing that not many (if any) people have experience of the software you're talking about which is why I guess you've been met with a wall of silence...sorry. Hopefully there is someone out there who has experience using it.

All the best...

GT Mechanical
09-01-2016, 11:27 AM
Hi Neil,
Thanks for messaging me, I managed to get the info from the factory in the end. I thought there must be another poor soul using NCCAD9a. im saving pennies for a better CAM package ie Siemens CAM express.

09-01-2016, 12:53 PM
fusion360 from Autodesk should be a cad/cam package, that you can use without spending much money. But I don't have experience with it.

Lee Roberts
09-01-2016, 01:54 PM
360 is really good, there's quite a few tutorial videos on YouTube and more planned for the future.

There is also a "hobby" option for registering and that gives you the program for free, after 12 months you just have to renew as for hobby use and your off again :).

It's what I recommend to people now when asked, it takes care of the CAM side of things to.