PDA

View Full Version : FOR SALE: boxford duet



reelman
18-01-2016, 09:15 PM
Boxford duet cnc mill/ lathe, ex school so in exhalant condition as you would expect from a little used machine. Comes with computer loaded with original cad cam software, boot up disk, and a spare hard drive pre-loaded with software. It’s all in full working order and comes with a six station tool holder, milling table and rotating tailstock. Only selling to fund new cnc project

Info From boxford Site.
Technical Specification
Swing Over Bed 225mm (Lathe)
Axis Travel (X x Z) 125mm x 360mm (Lathe)
125mm x 75mm (Mill)
Spindle Speed 200 - 2500rpm
Feed Rate 1500mm/min
Table Size Mill 180mm x 110mm
Spindle Bore to Pass 20mm


£900.00

reelman
13-02-2016, 08:15 PM
Hi Gordon, Just been on paletline for a quote they want £98.40. personally I would prefer to meet you half way that way I know it's not been dropped are damaged. Theirs a Manuel in pdf form. if you want to discus you can phone me on 07704802620

regards Tony

i2i
14-02-2016, 05:09 PM
you should be able to get a pallet delivered for around £50.

Try these. http://www.nationalpallets.co.uk/

reelman
14-02-2016, 07:18 PM
Hi Gordon, I'm located at WN2 5XT don't know about Insurance but if your serious I'll look into it for you. Just looked at national pallet and it says its insured and its cheaper or you can sort your own courier if you wish.

Tony.

i2i
14-02-2016, 07:36 PM
you can pick up a pallet on any industrial estate, just pop in any wholesalers or supplies companies and they will gladly let you take a pallet

reelman
15-02-2016, 12:22 AM
you can pick up a pallet on any industrial estate, just pop in any wholesalers or supplies companies and they will gladly let you take a pallet

Thanks for the info i2i they are cheaper than palletline

i2i
15-02-2016, 12:39 AM
Thanks for the info i2i they are cheaper than palletline

If you're asking are national pallets cheaper than palletline, probably. At £98 palletline are expensive for a single pallet.

reelman
25-02-2016, 09:01 PM
Hi Gordon, are you paying by paypal gift

reelman
05-09-2016, 10:17 AM
this is now SOLD