PDA

View Full Version : 3 axis opto for £75



irving2008
01-07-2009, 11:01 PM
24V, 1.5A TA8435 based - is this worth looking at? I need a 3-axis cheap driver quickly...


http://www.cqout.com/item.asp?id=4641898#bid

John S
02-07-2009, 12:07 AM
Item Location : China
Seller Location: United Kingdom

????????

Gary
02-07-2009, 08:09 AM
Will be ok for small 23 fram or 17 frame motors, but i cant comment on the quality.

Lee Roberts
02-07-2009, 09:09 AM
Will be ok for small 23 fram or 17 frame motors, but i cant comment on the quality.

Yeaaaaa you can, cmon dont be shy !

HankMcSpank
02-07-2009, 11:44 PM
Same board, £48.50 to your door here...

http://cgi.ebay.co.uk/Great-4-Axis-CNC-Stepper-Motor-TA8435H-Driver-Board_W0QQitemZ140327990865QQcmdZViewItemQQptZLH_D efaultDomain_3?hash=item20ac333651&_trksid=p3286.c0.m14&_trkparms=65%3A12%7C66%3A2%7C39%3A1%7C72%3A1683%7C 240%3A1318%7C301%3A1%7C293%3A1%7C294%3A50

Quite a timely post you made...I now need another driver board for "The McSpank Coil winder MKII" (using two steppers vs one stepper + DC cooling fan!) I've just managed to debug a 'half finished' (& only part working) Mach3 coil winder screenset, which seems to suit my needs perfectly...

http://img209.imageshack.us/img209/761/winder.th.jpg (http://img209.imageshack.us/i/winder.jpg/)

As it goes, I only need two axis, therefore I can cut the driver board in half & sell you the other two!!! :heehee:

BTW: What is that 'marketplace' where you found this driver board originally? (I've never come across it before & used to think I was internet savvy!)