PDA

View Full Version : adding engraving plug in



kell
17-03-2016, 07:28 AM
I have looked at the wizards on my mach 3 but the engraving one is not there.
Do I need to do something to get it or where can I download a engraving plug in.

lucan07
17-03-2016, 09:11 AM
not sure of answer but look here, I think this has all the information you need
http://www.machsupport.com/shop/mach3-addons-for-mill/

magicniner
17-03-2016, 09:21 AM
Are you looking for "Write" the text engraving Wizard (last on the list) in the free Wizard menu?

magicniner
17-03-2016, 09:57 AM
What are you trying to engrave?

cropwell
17-03-2016, 02:35 PM
What are you trying to engrave?


Probably going to be text.

kell
17-03-2016, 03:31 PM
I have made some molds and would like to be able to engrave my name on the front and what the molds is.
but on my copy of mach3 in the wizards I do not have the engrave one.

cropwell
17-03-2016, 03:53 PM
I have made some molds and would like to be able to engrave my name on the front and what the molds is.
but on my copy of mach3 in the wizards I do not have the engrave one.

Mine has one at the bottom of the Wizards list - called 'Write'. If you haven't got it you could try downloading it and re-installing.

kell
17-03-2016, 05:47 PM
Tnks guys found the write at the bottom, just need a good tutorial now

John S
17-03-2016, 08:26 PM
Here you go.

http://www.stevenson-engineers.co.uk/files/write.pdf

JoeHarris
17-03-2016, 09:24 PM
Here you go.

http://www.stevenson-engineers.co.uk/files/write.pdf

Well well well. Fancy seeing that packet of hobnobs again! Hi John

JAZZCNC
17-03-2016, 11:03 PM
Well well well. Fancy seeing that packet of hobnobs again! Hi John

Ye and it's same packet because the Tight Old B''##rd won't part with them. .:whistle:

Clive S
18-03-2016, 08:12 AM
Ye and it's same packet because the Tight Old B''##rd won't part with them. .:whistle:I know another one like that:hysterical:

JAZZCNC
18-03-2016, 09:14 AM
I know another one like that:hysterical:

Well didn't like to say that about you Clive but seen has you've come out the closest I'll agree 100%. .:triumphant: