PDA

View Full Version : Recommendations for PC Based G-Code Editor



jamesgates1000
25-03-2016, 02:14 PM
Hi, entering code by hand on my Denford Fanuc machines is a bit time consuming. I have downloaded trials of G-code wizard, Predator CNC editor and Cutviewer which I am going to have a look at But just wondered if anyone uses any of these or could recommend a good windows PC Based G-Code Editor with backplotting/simulation?

lp_felix
25-03-2016, 07:48 PM
i use nc corrector for a couple years and no problems until now. http://www.nc-corrector.inf.ua/index_EN.htm



i not create the g-code there, i only edit. like change tools or simple edit. nothing complex.

magicniner
25-03-2016, 08:50 PM
I use CAM that produces good code for my milling machine but I did find this interesting -

http://www.buildlog.net/cnc_laser/cnc/gcode_comment.html

- Nick

JohnHaine
27-03-2016, 12:36 AM
Gsimple - Google it.


Sent from my iPad using Tapatalk

jamesgates1000
01-04-2016, 11:32 PM
Thanks for the recommendations, nc corrector is pretty good so far