PDA

View Full Version : Controlling the spindle RPM



D-man
25-04-2016, 06:16 PM
Hi guys,

Has anyone had any luck or advice on how to wire the Chinese VFD to the ending cnc CPU5A board?

Cheers


Sent from my iPhone using Tapatalk

lucan07
25-04-2016, 06:30 PM
This might help
http://www.edingcnc.com/upload/files/cpu5a_flyer_tech.pdf

D-man
25-04-2016, 06:47 PM
Thanks ive got that, I've got the spindle running however I can't seem to work out how to control the RPM


Sent from my iPhone using Tapatalk

Clive S
25-04-2016, 07:01 PM
Thanks ive got that, I've got the spindle running however I can't seem to work out how to control the RPM


Sent from my iPhone using TapatalkHave you tried sending the S command ie S12000 or S4000 to change the speed I have never used that software though

D-man
25-04-2016, 07:07 PM
Thanks Clive, yeah I've tried that don't suppose anyone has a diagram do they? I asked Bert but he says that it's best to look in the Hanyan VFD manual


Sent from my iPhone using Tapatalk

lucan07
25-04-2016, 07:49 PM
I have HY 2,2 book here what are you after what model is yours according to book PD160 needs to be set to 1 to enable 1-10v control
page below18306

D-man
25-04-2016, 08:06 PM
I need to know what I need to connect to in order to ramp up the speed and decrease


Sent from my iPhone using Tapatalk

lucan07
25-04-2016, 08:11 PM
2 mins will get pages up for you1831018308183111830718309

D-man
25-04-2016, 08:14 PM
Cheers


Sent from my iPhone using Tapatalk

D-man
25-04-2016, 08:33 PM
Thanks fella I will have a look through


Sent from my iPhone using Tapatalk

cropwell
26-04-2016, 12:46 AM
Don't forget the jumper J1

lucan07
28-04-2016, 07:17 PM
Just came accross this while browsing so posting a link, you may want to save full manual for future reference.

http://www.jinlantrade.com/ebay/invertermanual.pdf

D-man
28-04-2016, 07:18 PM
Cheers pal just finished home switches so will start on spindle tomorrow [emoji849]


Sent from my iPhone using Tapatalk

lucan07
28-04-2016, 07:50 PM
Just finished mine today too ended up using cheap switches making acrylic casings as more accurate than the expensive ones I got hold of, wired spindle today and tested seems good, like the quietness of the water cooled spindle and sure the neighbours will appreciate it. Tomorrow I am firing up my build for the first time providing work doesn't interfere with play again, everything smooth and tracking nicely so fingers crossed.:beer:

D-man
28-04-2016, 08:36 PM
Awesome good luck! Not a better feeling than seeing it work/produce hmmmm well maybe when the wife is in a good mood [emoji3]



Sent from my iPhone using Tapatalk

lucan07
28-04-2016, 09:10 PM
hmmmm well maybe when the wife is in a good mood [emoji3]

Solved that problem 20 plus years ago, got rid of her and kept the kids now I stick to friends with benefits and do what I like, just as well, 3 road bikes and a time trial bike parked in middle of lounge tonight whilst I put up some shelving, these women get funny bout things like that I can't see a problem I can't get near the TV but I have a remote.

D-man
28-04-2016, 09:20 PM
Legend! Haha


Sent from my iPhone using Tapatalk