PDA

View Full Version : Replacement Stepfour stepper motor



Ross Shellard
14-06-2016, 11:51 PM
Hi, where can i get a new stepper motor for my Stepfour CNC hot wire foam cutting machine, I have swapped motors around and proved the motor is suspect, its a Nanotec 3.7 V 1.2A ST4018 M1206A 6 wire, thats the only info I have.

Stepfour went a fews years ago to my knowledge, I managed to contact Nanotec, they can supply me a motor or alternative with a minimum order of 300 off motors !!!!

Some other e mails i have sent out i never had a reply, any ideas ??

I may have to buy 4off thats fits my machine.

Clive S
15-06-2016, 12:10 AM
Hi, where can i get a new stepper motor for my Stepfour CNC hot wire foam cutting machine, I have swapped motors around and proved the motor is suspect, its a Nanotec 3.7 V 1.2A ST4018 M1206A 6 wire, thats the only info I have.

Stepfour went a fews years ago to my knowledge, I managed to contact Nanotec, they can supply me a motor or alternative with a minimum order of 300 off motors !!!!

Some other e mails i have sent out i never had a reply, any ideas ??

I may have to buy 4off thats fits my machine.Have you tried here http://www.zappautomation.co.uk/electrical-products/stepper-motors.html

m_c
15-06-2016, 05:34 PM
If you can work out what NEMA size the existing stepper motor is, then you'll fine a replacement far easier.

This page lists the dimensions - http://www.piclist.com/techref/io/stepper/nemasizes.htm

dodgygeeza
15-06-2016, 05:58 PM
zap has one that is the same.
http://www.zappautomation.co.uk/electrical-products/stepper-motors/nema-17-stepper-motors/sy42sth38-1206b-high-torque-hybrid-stepper-motors.html