Advertise Here
Advertise Here
View RSS Feed

LevonTech18

CNC USB CONTROLLER SOFTWARE and hardware

Rating: 3 votes, 2.33 average.
6 Comments
by
LevonTech18
on 24-05-2010 at 03:53 AM (1443 Views)
parts list v1.0 :

SV1-SV4 - ML10
Out1-Out3 - terminal block 2pin (for connecting output relays)
POW - terminal block 2pin (for connecting 5V power)
Reset - terminal block 2pin (for connecting reset key)
STOP - terminal block 2pin (for connecting PICStep enable switch)
LED - terminal block 2pin (for connecting LED indicator)
Key1-Key8 - terminal block 2pin (for connecting limit keys)
Pot - terminal block 3pin (for connecting 5k log potentiometer)
USB - USB TypeB
ICSP - header 5pin (NON STANDARD PINOUT)
Ext - header 10pin (for connecting jog keys with capacitors)
RExt - 8x 10k
RKey - 8x 10k
RO1-RO3 - 240R
R1 - 10k
Rled - 240R
C1-C2 - 22pF
C3 - 100nF
C4 - 100uF
C5 - 100nF
C8 - 100nF
Cusb - 100nF
CK1-CK8 - 100nF
XT - 8MHz
PIC - PIC 18F4550

CNC motion controller is a link between personal computer and drivers for stepper motors. It uses USB port which is available on all modern computers and laptops. This is a complete (software/hardware) solution and it does NOT require any additional software (Mach3 is NOT needed).
lol
Is controller compatible with Mach3?
Controller does NOT need Mach3. This is a stand alone solution and works fine without 3rd party software such as MACH

Software requirements:
DirectX 9c for .NET
Microsoft .NET 3.5 SP1 Framework
Beta version may require:
Microsoft .NET 4 Client Profile

There are no help files and/or manuals yet but it will be available very soon.

Software developers kit includes API, example and manual. You can use it to create your own software.
SDK does NOT work with DIY controllers.


Other files you may need:
DirectX 9c for .NET
Microsoft .NET 3.5 SP1 Framework
Microsoft .NET 4 Client Profile

"Jog key Circuit"
Part list
1k 1/4 w - 1
Led - 1
100nf - 10
Tact sw - 8
78L05 - 1
Jog circuit combine1.PNG
jog 1.JPG

Eagle CAD files >>http://www.ziddu.com/downloadlink/10...GCIRCUIT01.rar
Attached Thumbnails Attached Images
Attached Thumbnails Attached Files

Submit "CNC USB CONTROLLER SOFTWARE and hardware" to Digg Submit "CNC USB CONTROLLER SOFTWARE and hardware" to del.icio.us Submit "CNC USB CONTROLLER SOFTWARE and hardware" to StumbleUpon Submit "CNC USB CONTROLLER SOFTWARE and hardware" to Google

Updated 3 Weeks Ago at 05:02 PM by Lee Roberts (Moved it into a Category.)

Categories
General Blogging

Comments

  1. tribbles - 24-05-2010 09:30 PM
    tribbles's Avatar
    I'm in bit of a funny mood....


    I know - I'll copy a lot of stuff off the internet, post it here, and say nothing about it. I'm sure the bandwidth isn't a problem, and my hard drive is full - this must be a good place to keep it.

    The fact that some of it is already here is neither here nor there.
  2. nucutza - 13-06-2010 07:08 AM
    nucutza's Avatar
    You have copied all from here : http://www.planet-cnc.com/ !!
    Shame on you , it is not your work !
  3. LevonTech18 - 19-06-2010 10:08 AM
    LevonTech18's Avatar
    My own work is there. just look you will find it >i just put all together to understands my circuit more
  4. michael - 22-06-2010 08:44 PM
    michael's Avatar
    Hmmm, Looks kinda familiar!!! Based on the NIST interpreter by the look of things! Is it open source?
  5. and1_cu - 14-07-2010 01:32 AM
    and1_cu's Avatar
    very interesting... impressive.
  6. msi - 4 Weeks Ago 08:29 PM
    msi's Avatar
    Hello
    I wanted to connect to the motor connector guide
    Which pin should be connected to the engine?
    I need a connector between the engine and the motor driver is used?