boxford duet

Boxford duet cnc mill/ lathe, ex school so in exhalant condition as you would expect from a little used machine. Comes with computer loaded with original cad cam software, boot up disk, and a spare hard drive pre-loaded with software. It’s all in full working order and comes with a six station tool holder, milling table and rotating tailstock. Only selling to fund new cnc project

Info From boxford Site.
Technical Specification
Swing Over Bed 225mm (Lathe)
Axis Travel (X x Z) 125mm x 360mm (Lathe)
125mm x 75mm (Mill)
Spindle Speed 200 - 2500rpm
Feed Rate 1500mm/min
Table Size Mill 180mm x 110mm
Spindle Bore to Pass 20mm


£900.00

Hi Gordon, Just been on paletline for a quote they want £98.40. personally I would prefer to meet you half way that way I know it's not been dropped are damaged. Theirs a Manuel in pdf form. if you want to discus you can phone me on 07704802620

regards Tony

you should be able to get a pallet delivered for around £50.

Try these. http://www.nationalpallets.co.uk/

Hi Gordon, I'm located at WN2 5XT don't know about Insurance but if your serious I'll look into it for you. Just looked at national pallet and it says its insured and its cheaper or you can sort your own courier if you wish.

Tony.

you can pick up a pallet on any industrial estate, just pop in any wholesalers or supplies companies and they will gladly let you take a pallet

Quote:

---

Originally Posted by i2i

you can pick up a pallet on any industrial estate, just pop in any wholesalers or supplies companies and they will gladly let you take a pallet

---

Thanks for the info i2i they are cheaper than palletline

Quote:

---

Originally Posted by reelman

Thanks for the info i2i they are cheaper than palletline

---

If you're asking are national pallets cheaper than palletline, probably. At £98 palletline are expensive for a single pallet.

Hi Gordon, are you paying by paypal gift

this is now SOLD