I put the clips for my 2005 and 1605 ballscrews (from chai) somewhere really safe...
Can anyone give me an idea where I could get new ones - I can't remember exactly what they were like!!
Printable View
I put the clips for my 2005 and 1605 ballscrews (from chai) somewhere really safe...
Can anyone give me an idea where I could get new ones - I can't remember exactly what they were like!!
Joe for quickness nip to halfords, they do internal and external ones in an all sorted size box.
Joe, I have just taken a look at the circlip on the end of a BF12-C7 ball screw support that I have (not from Chai - from Gary @ Zapp) and I've measured it at 9mm internal dimension. Hope this helps.
That's the problem with putting things in a safe place, for your information - it only gets worse!!! G.
Thanks all, in future I'm just going to leave them lying around in the general mess of my workshop - be easier to find!
Sounds like a plan. G.
Realised I also lost the brass lubrication nipples that screw into the ballscrews - are these strictly required? I guess they stop rubbish getting into the screw...
Joe a lot of the ballnuts are supplied without them. I would plug them but make sure you dnt forget about them (put some lube in every now and then)
clue is kind of in the title....you might need them for lubrication.:joker:Quote:
Originally Posted by JoeHarris