Re: Hello from Nottingham
Hi Alan,
The Midlands seems to be very well represented on this board, nice to see another member joining the fold!
I'd offer to let you pick my brains but there's nothing there to pick. Besides, as my forum history might show, I'm taking the slow approach - currently averaging 12 months in between purchasing each component. In fact the toroidal transformer(s) for the PSU got delivered this morning, based on my last thread on the matter in September 2012...
Re: Hello from Nottingham
Hello!
I'm interested in the bit about the little plastic injection moulding machine, as that is something I might be looking into at some point in the not too distant future.
As for a suitable machine, unless you have a huge budget, you'll be looking at either a very compact/sturdy scratch build, or possibly something like a X2/3 and retrofitting it.
Re: Hello from Nottingham
Hi Alan, welcome to the forum. You certainly have a several of very experienced and competant members fairly close to you. What sort of items are you planning to mould? Good luck. G.
Re: Hello from Nottingham
I'm based in Long Eaton. Couple of miles from M1 J25
You are welcome to pop round but don't forget the Hobnobs
Re: Hello from Nottingham
Quote:
Originally Posted by
deadmeat30
My plan is to see if its viable to build a small machine that can mill 95x95mm Aluminum blocks.
If your just wanting to mill small materiel sizes like this then milling machine will be by far best option, either buy manual mill and convert to CNC or pay thru nose and buy ready made.!! . . . John S is your man to see for milling machine on both counts.
Re: Hello from Nottingham
Quote:
Originally Posted by
deadmeat30
Hello everyone,
It'll need to be to a high accuracy, as i plan to use the cut blocks on my little plastic injection moulding machine im currently fixing up.
Thanks,
Alan
hello alan what moulding machine have you got?manual/pneumatic?hydraulic?.its some thing im dabbling in but havent run anything through mine yet.
5 Attachment(s)
Re: Hello from Nottingham
Hey all,
Thanks for the warm welcome!
Let me answer a few questions.
Quote:
Rogue
Re: Hello from Nottingham
Hi Alan,
The Midlands seems to be very well represented on this board, nice to see another member joining the fold!
I'd offer to let you pick my brains but there's nothing there to pick. Besides, as my forum history might show, I'm taking the slow approach - currently averaging 12 months in between purchasing each component. In fact the toroidal transformer(s) for the PSU got delivered this morning, based on my last thread on the matter in September 2012...
Thanks Rogue,
Do you have a build thread at all?
Quote:
m_c
Re: Hello from Nottingham
Hello!
I'm interested in the bit about the little plastic injection moulding machine, as that is something I might be looking into at some point in the not too distant future.
As for a suitable machine, unless you have a huge budget, you'll be looking at either a very compact/sturdy scratch build, or possibly something like a X2/3 and retrofitting it.
Thanks m-c,
Ill come onto my Plastic injection machine later, its only a small thing.
Sadly i dont have HUGE budget, but my thoughts are, that over time getting the mould presses made, I could instead invest in a milling machine now, and over time save money. What kind of investment is this going to cost to get a nice compact/scratch build?
One thing i dont have is the workshop full of wondrous precision pillar drill and milling machines or lathes, im sure that would make my life much easier.
Quote:
GEOFFREY
Re: Hello from Nottingham
Hi Alan, welcome to the forum. You certainly have a several of very experienced and competant members fairly close to you. What sort of items are you planning to mould? Good luck. G.
Thanks GEOFFREY,
Thats good to hear, looking forwards to learning about milling machines. Im hoping to make some little wargaming miniatures. I currently cast models in resin with silicone moulds, but im always interested in trying new things, so plastic injection moulding is the next step!
Quote:
John S
Re: Hello from Nottingham
I'm based in Long Eaton. Couple of miles from M1 J25
You are welcome to pop round but don't forget the Hobnobs
Thanks John S,
Thats a lovely offer, and something I'll be greatful to take you up on sometime! Im just located at J27, so not far at all :chuncky:. Plain or chocolate Hobnobs?
Quote:
JAZZCNC
Re: Hello from Nottingham
If your just wanting to mill small materiel sizes like this then milling machine will be by far best option, either buy manual mill and convert to CNC or pay thru nose and buy ready made.!! . . . John S is your man to see for milling machine on both counts.
Thanks for the advise, I'll be sure to question John S to death ;)
Quote:
deisel
Re: Hello from Nottingham
hello alan what moulding machine have you got?manual/pneumatic?hydraulic?.its some thing im dabbling in but havent run anything through mine yet.
Hi deisel,
I'll give some more details of my machine as a number of people have now asked about it. I have a little Arburg C4 machine, it runs on compressed air. It has both automatic and semi-automatic modes. The machine was built in around 1953, so it rather old. I have spent the past few weeks cleaning it up and it. It can hold little 95mm x 95mm mould plates (hense why im looking at a milling machine to make them). I'll attach some pictures of it, I won it on ebay a little while back, and cant wait to get it running fully.
Heres my little beauty!
Attachment 9441
Here is the Electronic timer and old thermostat
Attachment 9442
The mould plate area and injection nozzle
Attachment 9443
Inside the new Thermostat i just finished
Attachment 9444
View of the PID from the front with on/off switch
Attachment 9445
Re: Hello from Nottingham
Quote:
Originally Posted by
deadmeat30
Thanks John S,
Thats a lovely offer, and something I'll be greatful to take you up on sometime! Im just located at J27, so not far at all :chuncky:. Plain or chocolate Hobnobs?
Plain, we are not all philistines on here, anyway chocolate melts when you dunk them.
Like decent coffee do you ?
PM sent with details.
Re: Hello from Nottingham
Quote:
Originally Posted by
John S
Like decent coffee do you ?
By that you mean crude Oil. .!!