Lost me 4 pin power connector for spindle
I had to move my machine which was epic, including removing most of the wiring. During the move I lost part of the power connector for the spindle so I couldn't lock the wiring into the spindle to ensure no movement.
After much searching I believe I have sourced the correct replacement
GX20 4 pin female
The cheap direct from China source
https://www.aliexpress.com/item/1set...ceBeautifyAB=0
UK source
https://www.ebay.co.uk/itm/GX20-Avia...72.m2749.l2649
EU source
http://cnc-plus.de/en/CNC-Electronic...3A---40V-.html
Hopefully someone else will find this information useful
Re: Lost me 4 pin power connector for spindle
I thought they were GX16 which are a bit smaller in diameter. Just check they will fit through the hole in the end cap.
Re: Lost me 4 pin power connector for spindle
Quote:
Originally Posted by
routercnc
I thought they were GX16 which are a bit smaller in diameter. Just check they will fit through the hole in the end cap.
We shall see on Monday I guess.
Re: Lost me 4 pin power connector for spindle
Quote:
Originally Posted by
routercnc
I thought they were GX16 which are a bit smaller in diameter. Just check they will fit through the hole in the end cap.
I've sorted it out now and the fitting is a GX20, I'll use the GX16 for my limit switches.
