!need Help CNC6040Z USB Limit switch wiring!
Hi,there everyone.
I need help with wiring my cnc6040Z USB 800 Watt machine 3 axis limit switches -->2 per axis in Normally Closed in series to the board mentioned bellow.
My problem is I have JP-3163B ver 3.9 motion controller board,On one side it has these connections--> VCC/XXW/XYW/ZXW and on the other C/NO/0-10V/ GND now please tell me do i need to place the 2 wires per limit switch for eg.for the X axis -->Com and NC wires in the XXW slot and Y axis Com and NC in the XYW and same for the Z axis in the ZXW or only NC wire in each of them and all the COM wires in the VCC slot?
Im so confused ???? plus do I need resisters or is it fine without???? :
And here is a link for the complete pic.
https://www.google.com/search?q=wiri...p8ASzSf5YzixM:
Please HELP anyone:(
Re: !need Help CNC6040Z USB Limit switch wiring!
Hi
do you have a link to the manual you can post ?
of better still -
take a photo of your board
as the google link goes to several pictures
I think you should find the limit switch connections should go to
a small 5 pin header on the board and not to any large screw terminals like the connections for the power and stepper motors
John
2 Attachment(s)
Re: !need Help CNC6040Z USB Limit switch wiring!
Hi.there I have tried to attached a pic of the actual board I have minus the DB9 which is optional on mine.now i also have [cnc6040z .settings file ] which i can not open and would like to know how to upload on this page it is saying invalid format please tell me how to upload??? I need your help on wiring limit switches and setting exact parameters in mach 3 or 4 demo according to these documents which came with the machine.???
Attachment 22863
1 Attachment(s)
Re: !need Help CNC6040Z USB Limit switch wiring!
hi i have managed to upload my cnc6040Z XML settings file that came with the cd for my machine.great i hope you can help me with everything from start to milling something.
i have also attached a pic of the actual limit switches i would like wire in series 2 per axis on the actual board....
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
<<<Now i know that 2 limit switches will have 2 wires coming from them ---->1) Com(black wire GND) /// 2) NC(Red wire)
so that is 6 wires /6 limit switches...>>>
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
now how and where on my jp-3163B v3.9 board i have attached a pic of , will 3 black wires and the 3 red wires be plugged in exactly ???
Also do i have use resisters with my limit switches or not i need full explanation i hope not ?????/??
Sorry for my persistence and rambling. :)
1 Attachment(s)
Re: !need Help CNC6040Z USB Limit switch wiring!
This is how I would connect the limit switches.
Attachment 22868
1 Attachment(s)
Re: !need Help CNC6040Z USB Limit switch wiring!
I see Eddycurrent beet me to it
while I was adding to one of your pictures
Attachment 22869
with only the link to select either the internal +5v or an external positive suppy for the input opto isolators
but no link to break the ground connection
it looks like you can not take full advantage of the input
opto-isolators
as soon as I can I will down load mach3 to see what the XML file setting are
John
Re: !need Help CNC6040Z USB Limit switch wiring!
Hi,there john hows things,have managed to figure out how to wire up my board, I'm stuck cant get to use my machine I need help on how to wire up 2 limits per axis for my board in the most simplest way and also do i need resisters and what value . basically I need a complete instruction on wiring limit switches on the board specified above???? then exact Mach 3 XML setup to get my machine moving quick and start pcb isolation milling and aluminum milling,Please HeLP ASAP its frustrating me the whole thing is catching dust....
Re: !need Help CNC6040Z USB Limit switch wiring!
You have the user name "Schematicsman", you are going to mill a pcb, and yet you can't wire two switches in series ? plus you can't read the previous two posts ! having a laugh ?
2 Attachment(s)
Re: !need Help CNC6040Z USB Limit switch wiring!
version 2 of limit switch diagram
Attachment 22885
John
PS
Attachment 22886
Re: !need Help CNC6040Z USB Limit switch wiring!
hi there John for starters that is just a user name i came up with, has nothing to do with anything and im a newbie in all of this wiring and cnc stuff.so im trying to learn how to wire everything up and properly setup Mach 3 like everybody else to start doing some milling ect.and I need to know,do i need to use resisters and also how do I wire all coms together and fit the wires in the connector???? :(