Some new interesting boards
Just stumbled in some new interesting boards, Russian maybe. here is the most interesting one price wise http://www.pv-automation.com/products/mycnc-et6 and there are some other offline versions with closed loop and single board computer. They have even quite nice looking software https://www.youtube.com/watch?v=qsif-p0iTF4
It will be good it seems to put them on the watch list.
Re: Some new interesting boards
I'll wait to see if they are candidates for working machines or for gathering dust on John's shelf ;-)
Re: Some new interesting boards
Re: Some new interesting boards
There does seem to be a few interesting options, but the lack of proper contact details puts me off.
A bit googling brings up the same contact details (and products) on bevelcutting.com with mention of being used in Russia, but if they are based in Russia, why the need to have a US contact number?
Re: Some new interesting boards
Quote:
Originally Posted by
m_c
but if they are based in Russia, why the need to have a US contact number?
To lose all the suckers once you've drained the market of Marks?
Re: Some new interesting boards
Quote:
Originally Posted by
m_c
There does seem to be a few interesting options, but the lack of proper contact details puts me off.
A bit googling brings up the same contact details (and products) on bevelcutting.com with mention of being used in Russia, but if they are based in Russia, why the need to have a US contact number?
We are based in Canada, Ottawa ON, company started Jan 2013, we have Canada contact number (not the US, however +1 area code is the same).
Bevelcutting.com is our old website, i didn't revise it a couple of years, but think there is no information that we are based in Russia,
But yes, we are russian (hope that's not a problem)
If other question will be glad to answer.
Regards, Sergey
Re: Some new interesting boards
Quote:
Originally Posted by
my-cnc
But yes, we are russian (hope that's not a problem)
As long as the board doesn't run on Vodka it'll be ok ;)
1 Attachment(s)
Re: Some new interesting boards
Quote:
Originally Posted by
Desertboy
As long as the board doesn't run on Vodka it'll be ok ;)
just look - no Vodka in the package
Attachment 22496
Re: Some new interesting boards
Quote:
Originally Posted by
Desertboy
As long as the board doesn't run on Vodka it'll be ok ;)
Nothing like a bit casual racism and stereotyping to lower the tone.
Re: Some new interesting boards
Quote:
Originally Posted by
my-cnc
We are based in Canada, Ottawa ON, company started Jan 2013, we have Canada contact number (not the US, however +1 area code is the same).
Bevelcutting.com is our old website, i didn't revise it a couple of years, but think there is no information that we are based in Russia,
But yes, we are russian (hope that's not a problem)
If other question will be glad to answer.
Regards, Sergey
I'm always wary of sites with few contact details, especially ones which very few people have heard of before. The only mention of location was the reference to being used in Russia on the bevel cutting website.
I'll be honest and say for the cost of your boards, I can get Dynomotion boards with similar capabilities, and more flexibility for less money. You could even get CS-Labs controllers for less money.