Anyone have a UK source for open ended 10mm T5 Polyurethane belt
Hi,
I have a need for around 7 meters of open ended (i.e. off the roll) 10mm wide T5 Polyurethane belt. I have found a US source at a sensible price, see here http://shop.polybelt.com/10T5-Open-E...-B10T5-MPS.htm but unfortunately no shipping to the UK. Does anyone have a sensibly priced UK source they have used ?
Cheers, Cam.
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
hi cam
have looked for open ended timing belt in uk before , and could only find this, its not t5 http://www.motionco.co.uk/timing-bel...-25_38_49.html
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
cam
another option is here not open ended belt but couldnt you get a long belt and cut it http://www.bearingboys.co.uk/Timing_Belts-1039-c
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
Might be worth being a bit careful. This was on that web site.
Codan Rubber Limited – In Administration
Thursday 18th February 2010
The affairs, business and property of the company are being managed by the Joint Administrators who act as agent for the company without personal liability
G P Bushby and M Wild are licensed to act as insolvency practitioners in the UK by the Institute of Chartered Accountants in England and Wales (IP numbers 8736 and 9300 respectively)
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
Thanks for the links, unfortunately I can't cut a belt because I can't find one long enough. I need an axis travel of 1 meter, therefore I need a belt just over 2 meters. The http://www.roulunds.co.uk/ web site looks the best, but the price is still much higher than the US one. I think I may contact the US guys and see if they are prepared to ship to the UK. I will let you know how it goes.
Cam.
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
Mel
Just to clarify was it MOTIONCO that is winding up? as there it where i am getting my belt from for my build.
TNX
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
I think it was http://www.roulunds.co.uk/ they have Codan plastered all over their web site.
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
Sorry. I should have made it clear. On the Roulunds web site it shows the history and they are Codan one and the same. I cut and pasted direct from http://www.roulunds.co.uk/ .