1 Attachment(s)
Re: 1200mmX900mmX170mm 4axis cnc
Welding time!
Workshop is so small even with the extension, that I can not take a full photo of the cnc table,lol , behind me you can see the old wall,it is where are the bricks, the extension is behind it where the blue curtain is.
80x80mm square tubes were used, for bracing I am going with 50x50mm.
Attachment 23454
Re: 1200mmX900mmX170mm 4axis cnc
Haha go go weldmaster :D
You will soon have use of all planning!
Lets not have a race.. have a feeling you will be ready before me ;)
Skickat från min SM-G955F via Tapatalk
Re: 1200mmX900mmX170mm 4axis cnc
No way!!! I have no motors, spindle ,not catted the alu plates etc....So, no way! hahaha!!!
Re: 1200mmX900mmX170mm 4axis cnc
Does any one have a good supplier for 2.2kw VFD spindle ? And 4nm nemma 23 motors with 8 cables?
Re: 1200mmX900mmX170mm 4axis cnc
Re: 1200mmX900mmX170mm 4axis cnc
4nm motors can be bought from cnc4you.co.uk or zapp automation :) those motors have good specs compared to ebay versions.. the ebay motors usually have high inductance.
Spindle + vfd seems more like a gamble..
Same sellers often ship different quality. Sometimes 3 bearings sometimes 4.
Sometimes with connected earth sometimes without.
No tips for you here....
Skickat från min SM-G955F via Tapatalk
Re: 1200mmX900mmX170mm 4axis cnc
Thanks Robert, so the spindle guestion is still a mystery,lol!
Re: 1200mmX900mmX170mm 4axis cnc
Quote:
Originally Posted by
Nickhofen
Thanks Robert, so the spindle guestion is still a mystery,lol!
Yes, i have bought two of these, one was really smooth and the other sounded like it was out of balance somewhere. Its 50/50 what you get but they are cheap.
Re: 1200mmX900mmX170mm 4axis cnc
Quote:
Originally Posted by
Davek0974
Yes, i have bought two of these, one was really smooth and the other sounded like it was out of balance somewhere. Its 50/50 what you get but they are cheap.
Thanks Dave,I will pull the trigger and buy a Chinese one and see what happen!
Re: 1200mmX900mmX170mm 4axis cnc
Quote:
Originally Posted by
Nickhofen
Thanks Dave,I will pull the trigger and buy a Chinese one and see what happen!
Try this https://www.ebay.co.uk/itm/2-2KW-WAT...8AAOSw-W5Us1mz