12 Attachment(s)
Denford TRIAC Servo VMC 1PH
Rare Denford TRIAC VMC for Sale. Excellent condition.
Serial No H00675,
Year Oct 2000, 240V,
12Amps, 50Hz,
Single Phase, Control Voltage 24Volts,
Spindle Motor 1.5HP,
1.12kW DC,
Max Speed 4000RPM,
Weight 630kgs,
8 Station Automatic Tool Changer With 3 Tools,
Denford Desktop Tutor Control.
Cabinet glass is with machine. Was removed for cleaning.
https://www.youtube.com/watch?v=54we2GTJL_E
Price £3000 ONO
Machine currently located in Cardiff.
PM if interested.
Re: Denford TRIAC Servo VMC 1PH
Nice machine, virtually identical to mine but with slightly different electronics and placement for some items.
Out of interest (ive changed my motors since and modified to Mach 3 via CS Labs), what is the highest feedrates you can get (X and Y) in mm/min, would you know or be able to check please?
Free bump for a nice machine.
Thanks
Re: Denford TRIAC Servo VMC 1PH
Awesome machine, I have a non servo triac
Little on the upper side price wise as it's not been converted
Re: Denford TRIAC Servo VMC 1PH
Quote:
Originally Posted by
Chaz
Nice machine, virtually identical to mine but with slightly different electronics and placement for some items.
Out of interest (ive changed my motors since and modified to Mach 3 via CS Labs), what is the highest feedrates you can get (X and Y) in mm/min, would you know or be able to check please?
Free bump for a nice machine.
Thanks
Hi I believe the set feedrates are 1.6m/min however I would expect the machine can do 2 to 2.5m/min
thanks
Re: Denford TRIAC Servo VMC 1PH
Quote:
Originally Posted by
fidia
Hi I believe the set feedrates are 1.6m/min however I would expect the machine can do 2 to 2.5m/min
thanks
Thanks. Mine is running 2000mm/min at the moment. The original servos are higher speed (mine are 8K) whereas my current servos are 3K, so Im OK with this as a speed if it does it consistently and accurately.
Re: Denford TRIAC Servo VMC 1PH
My current stepper triacs are running 2.25m/min in X and Y and 1.5m/min in Z.
With an 80V driver they probably could go a bit faster. I was intent on converting the servo triac however am moving due to work.
If you are interested in the machine I would probably sell at a lower price.
Re: Denford TRIAC Servo VMC 1PH
Quote:
Originally Posted by
fidia
My current stepper triacs are running 2.25m/min in X and Y and 1.5m/min in Z.
With an 80V driver they probably could go a bit faster. I was intent on converting the servo triac however am moving due to work.
If you are interested in the machine I would probably sell at a lower price.
Thanks. Ive got one but I agree, over £3K pre modernising is a bit pricy.
Re: Denford TRIAC Servo VMC 1PH
Id love the machine but already own two denford mills
Re: Denford TRIAC Servo VMC 1PH
Quote:
Originally Posted by
Chaz
Nice machine, virtually identical to mine but with slightly different electronics and placement for some items.
Out of interest (ive changed my motors since and modified to Mach 3 via CS Labs), what is the highest feedrates you can get (X and Y) in mm/min, would you know or be able to check please?
Free bump for a nice machine.
Thanks
Hi, Do you have “baldor D281 motion control card for a triac P. C. (denford), red 7-segment LED display type. The firmware is ESMINT 3.28 V1.6H/S - JD5.”
Re: Denford TRIAC Servo VMC 1PH
Quote:
Originally Posted by
Tommy
Hi, Do you have “baldor D281 motion control card for a triac P. C. (denford), red 7-segment LED display type. The firmware is ESMINT 3.28 V1.6H/S - JD5.”
Are you sure you have asked on the forum enough times?