Re: G-Code for Model Train
You want to be looking for CAD files rather than G code I would think, your CAM software will turn it into G code, are you talking about lathe work here ?
Re: G-Code for Model Train
I would imagine designing your own CAD model of the gear and then generating the GCode from that would be the ideal way to do it. Of course, you can always try searching the net to see if there is anything like the gear you require.
Re: G-Code for Model Train
Quote:
Originally Posted by
IanS1
I would imagine designing your own CAD model of the gear and then generating the GCode from that would be the ideal way to do it. Of course, you can always try searching the net to see if there is anything like the gear you require.
Thanks guys you can see I am new to this. More work on the internet tonight.
Re: G-Code for Model Train
Re: G-Code for Model Train
Thanks Eddycurrent these few links will keep me busy for a while a I try to work my way through them. I use Artcam 2013 so I will have to find a way to import some of the drawings and then break them down into the parts for a cutting list. Should be hours of fun and I hope a finished model at the end.
Thanks again.
Phil
Re: G-Code for Model Train
Which CAD software are you using ? or does your version of Artcam include what you need ?
Re: G-Code for Model Train
I think that Artcam has what I need. I must admit that I have not tried uploading some of the stuff I got from your links yet I might have some time this weekend to have a go. Thanks for taking an interest.