Look slike you have no speed set so it's running but at Zero speed.
Printable View
Look slike you have no speed set so it's running but at Zero speed.
Ok it's doing something. It's controlling via the software but not firing up
https://youtu.be/98LXdpYtOTw
Sent from my iPhone using Tapatalk Pro
Should I turn the other wires off in the VFD, maybe it's looking for those?(Green/red/yellow )
Sent from my iPhone using Tapatalk Pro
if this doesn't work then you probably not got voltage coming out of the eding so test voltage. @ s12000 you should have around 5v
ring me if still got number
Ok Guys had a bit time to revisit this. Your help would be very much appreciated.
The above options don’t work, however after a bit of fiddling, UV managed to get the spindle to switch on and off with the software.
My question is, what will control the speed? I’ve got 0-10v coming from the PWM and increases when spindle speed on the pendant wheel.
I’ve tried connecting to AC1&2 and also VC1&2 with no luck. I’m guessing it’s a setting in the VFD but I can’t see it.
It’s also worth mentioning that if I put PWM to X1-2-3 or 4 I get a separate set speed on each.
Please help guys, half way there! [emoji16]
https://youtu.be/b2cbv0fuKj4
Sent from my iPhone using Tapatalk