Re: Kress 1050 FME-1 Parts
Re: Kress 1050 FME-1 Parts
Quote:
Originally Posted by
CrazeUK
Hey guys,
I bought a Used CNC with a Kress 1050 FME-1 ROuter / Spindle.
Unfortunately i forgot to check all the bits where there.
It turns out the:
1. Nut
2. Collet
3. Lock power cord
Are all missing, Does anyone know where i can get some from or purchase alternatives, i have noticed the official ones are VERY expensive.
£45 for a cable
£25 for the nut
£15 for the collet.
Thanks in advance
Hi Craze
This chaps got all you need
http://www.bk-faserverbundtechnik.at...hp?cPath=13_51
http://www.bk-faserverbundtechnik.at...roducts_id=144
http://www.bk-faserverbundtechnik.at...roducts_id=285
http://www.bk-faserverbundtechnik.at...roducts_id=141
http://www.bk-faserverbundtechnik.at...roducts_id=150
the chap that runs the firm is very nice and prices are reasonable.
Cheers
Andrew
Re: Kress 1050 FME-1 Parts
Re: Kress 1050 FME-1 Parts
Quote:
Originally Posted by
A_Camera
Hey. Thanks. Ya. I put one in a normal discussion thread, guess more to find out if there was alternatives, then realised I should have put a wanted ad too.
Sent from my SM-N930F using Tapatalk
Re: Kress 1050 FME-1 Parts
Hey All.
Just an update. I now have a 6mm collet, a nut, and the cable. All that i need for the moment while i play.
I definitely plan on switching to a spindle sooner rather than later.
Thanks for everyones help :D