For sale Novamill. I have converted this mill to Linuxnc with new drives and power supply, I have also fitted a power draw bar with standard BT 30. I have also raised the column by 70mm.
The feed override and spindle speed pots have been changed to alps encoder pots and are working correctly along with the E-stop. It will have the original pc with linuxnc loaded and working.
These machines have 16mm ball screws.
It will need a small compressor for the power draw bar. There is no tooling included just the new BT30 with collet
I am asking £1600 no offers as I have put a lot of work into this. It is located near Stockport SK6
Photo's https://photos.app.goo.gl/8D97jSV8feuLU6bu6