Looking for a 2 - 3 foot long transmisson belt, about 1" or so wide, the sort that has 3 or 5 ribs along the length of the belt. Second-hand, as long as not fraying, would do! These are often used as fan/alternator/accessory belts on larger trucks.
Printable View
Looking for a 2 - 3 foot long transmisson belt, about 1" or so wide, the sort that has 3 or 5 ribs along the length of the belt. Second-hand, as long as not fraying, would do! These are often used as fan/alternator/accessory belts on larger trucks.
Are you still looking for belts? i've got all sorts of belts the workshop
yes, i need to replce the leather one on the lathe. the sort I am looking for are like VW fanbelts...5 or 6 ribs about 5mm deep
Ok I'll have a look tommorow if I get chance. Didnt see the bit about the longitidinadal ribs tho.:eek:
I know theres loads of standard of vee belts
I'm afraid I only have 1 in stock:heehee:
Its 14.5mm wide, 5mm thick overall (2.5mm thick min.) and 740mm ish in lenght or 1480 -1500mm cirfumference, it is aslo a bit cracked/ crazed on the inside. If it sounds any good or at least as a stand by then PM your address and I'll send it up, no charge. If its no good you can throw it away for me.:smile:
worth a go...pm sent
Those ribbed belts are normally used on alternators on diesel fords and when I mentioned the crazing to my garage they said they last a long time with the crazing so you may get some life from a crazed belt.
Peter
exactly... it doesnt need a new one.. but 15mm wide might prove too narrow...suck it n see time...
I'll post it tommorow (or is that later today?:eek:) hope it works...