-
Switch for motor?
Hi guys,
I have recently bought a tapping machine with a 3 phase motor. I have changed the motor to single phase. The spec of the motor is as follows:
50hz
0.18kw
220-240v
1.5A
I need to buy a green and red push bottom switch to attach to the machine but have no idea of the technical name for it? Any ideas? A link to website would be appreciated too.
Thanks guys.
-
Re: Switch for motor?
It's a "motor starter", ebay is full of them but you need to disallow "starter motor" when you search
-
Re: Switch for motor?
Or search for a 'DOL' as they are also known as
-
Re: Switch for motor?
If the motor is only 0.18KW then you dont actually need a starter. Control gear is only required for motors with ratings above 0.37KW if I remember correctly.
-
Re: Switch for motor?
You don't need a starter switch for such a small motor but it is a good idea to use a "no volt release" or NVR switch so that the motor won't restart after a power cut.
For example this
Russell.