Re: USB TO Parallel Port DIY Interface
usb.org
Click "Developers"
Click "two option" link in "Getting a vendor ID"
Click the third of the two options, ""vendor ID" no logo licence
Gets you here...
http://www.usb.org/developers/vendor...h_02042009.pdf
First paragraph includes the restriction
Paragraph 2, the admin fee, results in the Yorksire War Cry...
'Ow much? :eek:
Re: USB TO Parallel Port DIY Interface
please help me.. i have been working on pic18f4550 for making a usb to parallel port ,,, i saw a hope after looking this thread...
due to cost reasons i can stick to pic18f4550 only...
the firmware and software links are dead please update ,,some one help :( :( !!!!!
:eek:...
there are some more doubts regarding this thread,after i program the micro controller and make all driver loading will my computer will detect it as LPT ? (as printer port in device manager like that of desktop systems)if know that how will be able to access the DB29 port?
:( :( i am in an urgent need of help... i will be very thank ful; :)
rony
Re: USB TO Parallel Port DIY Interface
Quote:
Originally Posted by
ronmalfred123
please help me.. i have been working on pic18f4550 for making a usb to parallel port ,,, i saw a hope after looking this thread...
due to cost reasons i can stick to pic18f4550 only...
the firmware and software links are dead please update ,,some one help :( :( !!!!!
:eek:...
there are some more doubts regarding this thread,after i program the micro controller and make all driver loading will my computer will detect it as LPT ? (as printer port in device manager like that of desktop systems)if know that how will be able to access the DB29 port?
:( :( i am in an urgent need of help... i will be very thank ful; :)
rony
I am afraid CNCDudeZ website is down and hasnt been updated for a while. You could try PM'ing CLaNZeR (CNCDudeZ) direct but he's not been around for a while and I don't think he supports this project any more.
Moderators
Re: USB TO Parallel Port DIY Interface
Hi welcome back Sean... Google was reporting the .co.uk site as off the air earlier today when i tried it...said their last cache was the 14th December..
Re: USB TO Parallel Port DIY Interface
Hey welcome back Sean and when you popin in for this cup of tea on the way through Swindon?
Paul
Re: USB TO Parallel Port DIY Interface
Quote:
Originally Posted by
CLaNZeR
Have spent the holiday working on the Caliper Hack as I notice a few guys have been playing with it also on another thread.
I hope to use it for PWM on solenoids driving a X'Y table using air pistons and hope to get it pretty precise.
Which thread is that Sean?
Re: USB TO Parallel Port DIY Interface
Quote:
Originally Posted by
CLaNZeR
Yes, i saw... :smile:
Re: USB TO Parallel Port DIY Interface
No worries Sean good to hear you still about.
Re: USB TO Parallel Port DIY Interface
Hello Lee,
i'm currently working on a software that should control 4 motors for a wire machine using our software, see the software here
http://www.youtube.com/watch?v=WzB3aYCwk8g
we really would like to sell the software with a dedicated hardware for controlling the 4 stepper and the question is
if your development could be used as a starting point for this and how much it would cost.
As you can see, we need 4 motor axis direction control, and we could use some others i/o for heating the wire and limit control.
if you have interest in this project please contact me at [email protected]
Thank you for your time
Re: USB TO Parallel Port DIY Interface
In the first place happiness for their project. I am a student that I would like to carry out this badge USB. The problem is that my parallel port is different and therefore I cannot make it. My parallel port is the following one:
Pin1 X Step
Pin2 Y Enable
Pin3 Y Dir
Pin4 Z Dir
Pin5 Z Step
Pin6 Z Enable
Pin7 X Dir
Pin8 Y Step
Pin9 spindle MOTOR
Pin10 X Home
Pin11 Y HOME
Pin12 Z HOME
Pin13 EStop
Pin14 X ENABLE
Pin15 EXPAND
Pin16 EXPAND
Pin17 EXPAND
Pin18 to Pin25 GND
The Firmware could send me for the PIC 18F4550.
THANK YOU