Re: Plug for water cooled Chinese spindle
Quote:
Originally Posted by
irving2008
If the 19mm is to get the current capacity, (GX16 is nominally 5A) ask them if they can do 1.5mm pins instead of 1mm in the GX16. They'll be good for 8+A and some suppliers do them in the 16mm shell (as per one of the datasheets I listed)
It's partly that, but also to get the wire size I require in them; 4-core CY 1.5mm^2 cable.
Re: Plug for water cooled Chinese spindle
Yes I got the same email from Andrew this morning for 4 pin and 6 pin.
That'll do me nicely as I'm not into wiring a stepper motor with welding cable :calm:
Anything larger than a M542 and I hard wire back to the driver anyway.
1 Attachment(s)
Re: Plug for water cooled Chinese spindle
They arrived today:
Attachment 6689
Quote:
Originally Posted by
John S
Anything larger than a M542 and I hard wire back to the driver anyway.
I prefer to do that, but for some reason people seem to enjoy sticking connectors in between.
Re: Plug for water cooled Chinese spindle
Quote:
Originally Posted by
Jonathan
They arrived today:
Whcih ones are those Jonathan, they look like they're still the back-to-front ones (chassis plug/line socket)?
Did anyone order some chassis socket/line plug ones in bulk and be willing to sell some?
Re: Plug for water cooled Chinese spindle
Quote:
Originally Posted by
irving2008
Whcih ones are those Jonathan, they look like they're still the back-to-front ones (chassis plug/line socket)?
Yes they are, but they'll be fine for limit switches and signals as they're well under 50V. I'm going to order some of the right-way-round ones - once the seller has got back to me about getting them with 19mm external diameter I'll get some of both sizes.