Hey guys, I'm having a bit or a mate at the moment with the workpiece in vcarve pro outputting to the machine.
for example if I want to cut along the Y on the machine I have to create my workpiece vertically in VCP
any ideas
Printable View
Hey guys, I'm having a bit or a mate at the moment with the workpiece in vcarve pro outputting to the machine.
for example if I want to cut along the Y on the machine I have to create my workpiece vertically in VCP
any ideas
Not sure I understand, can you upload a vcarve file and I'll have a look if you want
Don't think the file would help much to be honest as I think it on my side.
Basically if im doing text along the width of my table I have to draw it vertically in VCP. When really it should be across my screen
In V-Carve Pro, the X axis is left to right. It sounds like you stand at your machine with the X axis moving from front to back.
I'm running the uniport.
There's Geary, is there a way to solve this orientation wise?
I'm unable to do that due to running 2 motors on the x
draw it in X-axis and rotate into Y-axis
yeah thats what im currently doing but thought i would rather try and fix it so i dont have to mess about
It only takes a couple of key strokes!!