Sounds like the wrong post-processor there, code error.
Printable View
Sounds like the wrong post-processor there, code error.
Check the box "IMMEDIATE RELAY OFF BEFORE DELAY" its not your issue but should be checked for plasma, might as well set those 1 second times for 0 as well.
The issue you mentioned sounds like the code you are using is not configured for plasma, can you post what software it was from - SheetCam, Aspire etc and maybe post the code as well.
It's the road runner one on mach 3
Sent from my SM-G361F using Tapatalk
What is the error in the photo
Sent from my SM-G361F using Tapatalk
Check the box "IMMEDIATE RELAY OFF BEFORE DELAY"
Check the box "DISABLE FLOOD/MIST RELAY"
Ive done all that now still not stopping cuting only at the very end.it that road runner gcode durable for plasma .where could I get a sample gcode from
Sent from my SM-G361F using Tapatalk
Right I got it sorted it was the drawing the whole time. Thanks all for your help have a new problem but will start a new thread
Sent from my SM-G361F using Tapatalk