Re: carving issues-UNSOLVED
yes I fitted a laser pointer so I could trace the movements let it run on a couple of cycles it still stalled so sadly no noise issues as far as I know. sorry if I havent explained myself so well Ive been running backwards and forwards to the workshop all day trying various different things and I am a complete noob.
Re: carving issues-UNSOLVED
Quote:
it still stalled so sadly no noise issues as far as I know
What make you think there is no noise issues?
Have you tried just using the x axis with a cut and then the Y axis with a cut to see if any one of those stalls
Re: carving issues-UNSOLVED
I mean it stalls with no cutting at all I thought you meant noise from the router. its so random, and intermittent I am now investigating the PC as this problem has control all over it. If this turns out to be ok I will look again at the movement, tomorrow will tell.
Re: carving issues-UNSOLVED
Quote:
Originally Posted by
woodworker
I mean it stalls with no cutting at all I thought you meant noise from the router. its so random, and intermittent I am now investigating the PC as this problem has control all over it. If this turns out to be ok I will look again at the movement, tomorrow will tell.
Google EMI https://en.wikipedia.org/wiki/Electr...c_interference It is very common if the wires are not screened.
Re: carving issues-SOLVED Finally
:tears_of_joy: Its working after a complete computer rebuild new graphics card I have ran it for 2 days without it making that awful sound in fact it ran for 3 hours constant today it didnt put a foot wrong so thank you everyone for the information and help, now how do I make money with it :glee: