Very popular for generating 'magic smoke' !
Printable View
So far in last year I 've used 8 of these boards and none have yet had any problem all used in small machines cutting 1/2" Lexan, I did the electronics for a company that built their own machines, so either I am lucky or have a good supplier.
Will let you know if I get a bad one.
Multi axis driver boards do not have a good reputation on this forum. There may be some makers in China who are less attentive to quality and I am wary of the safety and reliability of electrics made in China where inferior materials have been used in manufacture. I suppose if you buy from a UK dealer with a good reputation, you have a better chance that they have sourced a good supplier, but you can never be sure. UK, German or American made electronics may be more reliable, but for amateurs like me, they are just too pricey.
After I read about your mods I remembered I had some small box section kicking about, with that I found myself nocking something up for mine, I'd been meaning to do for awhile, it needs some paint and the end caps haven't turned up from the bay yet...
but can you "guess wadit'is yet" ?http://uploads.tapatalk-cdn.com/2016...9fab3bbd40.jpg
The bottom/tray is is just some 1.5 mil ali sheet I had, it's pop riveted on.
.Me
More workshop stuff . . .
https://youtu.be/NiXFlVzR29Y
Episode 2 : making the control box and deep dive into the XSY AT1 inverter setup. Impressed so far (for the price) . .
https://www.youtube.com/watch?v=JrIEI-4Iupo