I have the 500w Telecom PSU ( same as the E-Bay one). very much a newbie and need to know which pins to use to connect to a PM 752 Driver Board
Thanks
Mick
Printable View
I have the 500w Telecom PSU ( same as the E-Bay one). very much a newbie and need to know which pins to use to connect to a PM 752 Driver Board
Thanks
Mick
Here is the pinout. The pins you need are:
12 and/or 14 to the +V rail on the driver P2 connector
20 and/or 22 to the GND connection on the driver P2 connector
hope that helps