hi folks, what size nema 23 motors (oz or nm) would u reccomend to put on a machine for cutting soft wood, i don't want to waste money and go over the top
Printable View
hi folks, what size nema 23 motors (oz or nm) would u reccomend to put on a machine for cutting soft wood, i don't want to waste money and go over the top
My idea would be 2.2Nm but if you went for 3.1Nm they would be better to reuse for version 2 of your machine.Quote:
Originally Posted by universally
cheers eddy, was gonna go for 3.1 but wanted expert advice :)
Okay, go with the 3.1 I only mentioned 2.2 to keep the cost down. On my machine I used the 4Nm; http://www.cnc4you.co.uk/Stepper-Mot...BYGH401-03-x-4
Correct answer to this question is that it Can't be answered correctly because you have give no details of the machine.? Just cutting wood means nothing.!
Eddy's 3.1nm suggection will 99% be correct but could easily be miles out if you have say 200kg gantry running on threaded rod.!! . . . OTT example yes possibly but hopefully highlights what I'm getting at.?
But the machine is known, it's here :wink:; http://www.mycncuk.com/threads/8320-...5972#post65972Quote:
Originally Posted by JAZZCNC
But it should have been linked here in first place shouldn't it for people not knowing this to answer correctly.:hopelessness:Quote:
Originally Posted by EddyCurrent
sorry, my fault, im new to forums,i should of linked it, cheers eddy for the link :)