(probably why it doesnt work lol)
Ya could be right there, start with contacting Rhonmac.
Phill
Printable View
(probably why it doesnt work lol)
Ya could be right there, start with contacting Rhonmac.
Phill
do you use Aspire yourself Phill? if you do would it be possible please for you to output me a simple file 100mm X 100mm project size and a pocket of 60mm X 60mm depth of 30mm tool size 8mm mill, that way I will be able to check if my software is working correctly. Thanks not to worry if you cant or dont use.
Yes mate on it now
awesome thank you
cheers Phill will let you know tomorrow
Hi Phill
Same unfortunately the tap file cut ok for around 5 cuts then went left by approx 20mm (the bit doesn't like being shoved across a thick piece of wood) and the second file cut to the right approx the same at least I can rule out Aspire as the culprit, going to make a phone call me thinks.
Solved turns out my Mach 3 copy is corrupt what did I expect as it came with my long dead Chinese laser machine so I now need to purchase a new Mach 3. Big thanks to Phill for going beyond the call really helped me nail down the issue.
If you purchased a proper licence, then you should be able to download Mach3 and use the same licence. If the licence came with the Chinese laser, then it is probably a 'pirate' and the download won't work with it.
yeah should have realised :) reg to papa somebody just have to wait for payday now.
papa fabio strikes again.