The epoxy pour looks really good!
Printable View
The epoxy pour looks really good!
Well... need to say...
Disaster
Something went wrong ....
There was a tiny leak.
It leaked on the surface of Xaxis... it sucked inbetween the gantry and bed...
I did make preparations to prevent this.
I sprayed wd40 inbetween before pouring.
So nothing could stick.. worked only partially.
I needed a hammer an chisel to separate the gantry from the bed.
1 side of the x bed surface delaminated from the steel ....destroyed .
So deep breath ... cleanup and do it once more...
Grtz Bert.
Verstuurd vanaf mijn SM-A320FL met Tapatalk
I am sorry to hear about that.
Bom ordered BST Fred.
Anyone with experience from NL here?
I am curious about how this will work with dutch customs..
I understand carrier will report to tax administration..
My estimation is about 27% extra cost.
21 vat 5 import and some minor handling cost.
Guess i will pay tax and handling cost to carrier..
Grtz. Bert
Verstuurd vanaf mijn SM-A320FL met Tapatalk
So... guess what the post man brought today.
Goodies from china.[emoji3][emoji3][emoji3]
Guys, thanks for recommanding Fred from BST.
Everithing looks good and well packed.
Some heavy cardboard box reinforced with multiplex all wrapped in plastic foil.
2nd attempt at pouring epoxy is underway.
Tomorrow ill visit the local tool station to go and get m5 machine taps and some nico 4.2 drills.
Also.... need to source some Alu tooling plate. for gantry.
And have some 20mm mdf cut for test fit.
Its gonna be busy holidays.
Grtz. Bert.
https://uploads.tapatalk-cdn.com/201...f89f9eb298.jpghttps://uploads.tapatalk-cdn.com/201...11db575f67.jpghttps://uploads.tapatalk-cdn.com/201...4e28603c99.jpghttps://uploads.tapatalk-cdn.com/201...7934dd5025.jpg
Verstuurd vanaf mijn SM-A320FL met Tapatalk
Nice goodies Driftspin!
It seems that Christmas came early ;-),Merry Christmas !
Well i am not sure yet.. fedex delivered... i paid Fred... But i have not been taxed yet..
I guess it will be in the +/- 1300.- euro range.
I understand sometimes you pay tax in the country where goods enter EU.
That would be belgium..
Grtz. Bert.
Verstuurd vanaf mijn SM-A320FL met Tapatalk
Top Z carriage position.
Hi guys..
I am doing 15mm plywood test fit for all Z axis alu plates before ordering.
Where did you mount your top carriage?
High or low? And why?
Grtz Berthttps://uploads.tapatalk-cdn.com/201...5137a17ccf.jpghttps://uploads.tapatalk-cdn.com/201...efeae50905.jpghttps://uploads.tapatalk-cdn.com/201...5b50ab8a05.jpghttps://uploads.tapatalk-cdn.com/201...7a050ef548.jpghttps://uploads.tapatalk-cdn.com/201...04eb5b64ab.jpghttps://uploads.tapatalk-cdn.com/201...90effdad62.jpg
Verstuurd vanaf mijn SM-A320FL met Tapatalk