I read a thread not too long ago where a link to a Router build using epoxy between the frame joints was posted, for the life of me I cannot find it again. Anybody any ideas? (That will teach me to bookmark the snippits of info I want to re-read)
Printable View
I read a thread not too long ago where a link to a Router build using epoxy between the frame joints was posted, for the life of me I cannot find it again. Anybody any ideas? (That will teach me to bookmark the snippits of info I want to re-read)
there was a discussion in the thread 'opensource design' on this, but i dont recall a specific thread on the subject... there are some on CNCZone tho
Hmmm, I remember that the link led to a site that belonged to an American guy, he built a huge steel framed machine and he used an epoxy type stuff between the joints and he also used it in combination with a surface table to put a flat layer on theframe members his linear rails were bolted to.
There was this thread on CNCZone
You are a Star ... that's the one ... I have marked it now, so I will not go asking daft questions again.
Many Thanks
There is this guy from the Uk
http://www.cnczone.com/forums/showthread.php?t=30751
Andy
Yep got it ... thanks.