My is 3040T and the spindle is a ER-11
Printable View
My is 3040T and the spindle is a ER-11
For my tools...
because the blades of the tool are down...
They cut in opposite side..
I've not seen those, all I've seen are 'up spiral' and 'down spiral' cutters but they all rotate in the forward direction.
http://www.trend-uk.com/en/UK/trend/...ledge&id=15884
my turn in the clockwise direction.... it is right that there has to turn in that direction??
thanks for the reply me man...
Looking down on the machine all cutters should turn in the clockwise direction, same direction as a drill would. The up and down spirals are in opposite direction but they both cut in the clockwise direction.
Did you look at the link above to trend-uk.com ?
then I bay something wrong... :(
clockwise direction....
instead the cutting tools have in counterclockwise