Hi i know this i a long shot but fingers crossed you could help.
Dose anyone know or is capable of milling foam from a 3d cad file,to reproduce car panels a link and picture below of what i am talking about.
Many thanks
Printable View
Hi i know this i a long shot but fingers crossed you could help.
Dose anyone know or is capable of milling foam from a 3d cad file,to reproduce car panels a link and picture below of what i am talking about.
Many thanks
Umm - me?
Well, I should say that I'm in the process of building a machine to do just that; it's not quite ready to start, so what kind of timescales are you after.
Oh, and Hi :smile:
ETA: also, is it full 3D you're after? The process I'm doing is orientated towards a block-based 2.5D, and there'll be some manual processing to put the blocks together. However, since I'm the intended market, it doesn't worry me :smile:
What are the overall sizes of the finished pieces?
Just getting my head round 3D milling at the moment using FeatureCam so anything is possible with the software, it is just the machine that creates the limitations....
At the moment, we (it's a joint venture between myself and a kit car manufacturer) haven't really got an idea as to costs. We know that to do a full car, you're looking at about £3000 for just the blocks themselves, but for something where you'd need to prep it a bit before taking the mold [namely coating it in something a bit harder), then the foam can be £1000.
Obviously we'll get a better idea when we've got a car done :smile:
Note that we did look at getting someone to do it as well - from memory, it was about £6k for a rough cut (it would need coating in clay), or £24k for a fine cut.