Re: Where are all the used mills in the world????!!
Re: Where are all the used mills in the world????!!
i regularly get Denford and Boxford cnc mills in, i only have Denford Starmills atm, but i may have a Denford Triac in around mid September
Re: Where are all the used mills in the world????!!
Thank you both for your replies! Talk about quick response! Wow!!
In answer my budget is very low, that is why I am looking at Sieg or Clarke style machines, x1 preferably x2 type capacity. I have a max budget of £300 at a push which I know is not a lot to buy with. Times are very tight as I'm sure everyone knows!
I'm just surprised that these smaller machines don't find their way onto the second hand Market.
I've been hearing horror stories about the x2 driver blowing up lots so it seems odd that people aren't passing them on. I'd happily build a new control circuit.
Anyway, ramble and whine over ;-)
Thanks again :-)
Nick
Re: Where are all the used mills in the world????!!
I think you'll struggle to find an X1/X2 at that price...
There are usually a goodly supply of round column machines on ebay, typically the Warco MD30/Clarke 25 which usually have a bigger table than the X1/X2 for around £300 - £400. The dovetail columns rarely appear...
Not sure how big an X0 is, but have you looked at Amadeal's range of machines? I'm sure there's and X1 sized one for under £500 new...
Re: Where are all the used mills in the world????!!
You sometimes get the odd ones on here.
http://www.homeworkshop.org.uk/
But you have to be quick, the stuff goes off there like wildfire.
Bogs
Re: Where are all the used mills in the world????!!
Hello again everyone!
The site is back yay! Many thanks for the ideas, i like the look of the machines on amadeal, guess i need to save like mad to try to afford a bigger machine. In the long run and especially if i try to CNC a machine there is no point getting a little machine and finding it underated after all the conversion work. The amadeal 500w dovetail mill looks rather promising for features and size at £498! Anyone looking to guy a used abused kidney!!
I am also keeping my eyes firmly locked on homeworkshop because they seem to have some really good and some unusual deals :-) Many thanks for the pointer to there!
Anyway i have to say you are all so helpful and a pleasure to talk to!
Best regards to all,
Nick
Re: Where are all the used mills in the world????!!
Hi Nick,
I have a XJ12-300 from Amadeal (Which is basically an X2 with a longger table and a bit more travel on the Y axes)
I would sell it to you for £300 / £350 if you can come and pick it up from my place... (Bradford West Yorshire).
I am upgrading to something Bigger.
Regards,
L