1 Attachment(s)
Re: Sx2 plus cnc conversion
http://www.mycncuk.com/attachment.ph...id=13469&stc=1
Started cleaning the lathe and got a bit carried away lol
i had some paint of a steel structure I fitted in work and it's fire rated paint so I thought y not
Need a good vfd for a 0.5 hp 3 phase motor any suggestions?
where can I get a tool post also as the ones that came with it are home made and don't look good?
2 Attachment(s)
Re: Sx2 plus cnc conversion
Finished the lathe up to now I have put a misubishi vfd controller and a 3 phase motor on it an it runs well. I can control the speed easily
I bought new bronze nuts for the top slide and crossfeed and a new top slide leadscrew
Ive just finished my sx2 leadscrews and am waiting for some alloy to be posted and then I can make the mounts for the delrin nuts that I've also finished
Attachment 13950Attachment 13951
FINALY SOME PROGRESS:sneakiness:
What is the easiest way to learn how to draw a part then turn it to a g-code for mach3 ?
Or am I best buying a digitizing probe of fleebay from US for $199