3d Milling using Siolidworks and SolidCam ***Guide***
I've written a little guide for anyone wanting to get into 3d milling using solidworks.
I hope it helps some people and I would appreciate feedback and if this thread could be stickied.
use my guide at your own risk! double check the tool paths in mach!!!!!
https://docs.google.com/open?id=0B-O...0Y3ekZrRmtvVEU
I advise downloading this and not viewing it in Google docs!!
links to post processor
https://docs.google.com/open?id=0B-O...EZpaHBmV0h4TEE
Re: 3d Milling using Siolidworks and SolidCam ***Guide***
Wow, I just read your manual and without testing it, it will already solve some problems I have . Great job indead !!!
Thanks a lot