Re: The Common 2.2Kw Chinese Spindles - Info, Setup and Advice + More !
Managed to sort it, fired it up and its sweet. One thing thats bothering me is at 24k theres almost like a rattle inside that sounds like a bad bearing but drop a few thousand rpm and it vanishes.
Good points are when it was running there was 0 vibrations on the kitchen counter and it sounds good although its going to be a while before I get used to the different sounds at different ranges, I'm used to it just getting loader :D
Cheers, Phil
Re: The Common 2.2Kw Chinese Spindles - Info, Setup and Advice + More !
Phil
Like a new car it is worth running the bearings in before loading it up at full chat.
Re: The Common 2.2Kw Chinese Spindles - Info, Setup and Advice + More !
In progress now, its running at 10k and has been for 15mins so far, will give it another 15mins.
Cheers
Re: The Common 2.2Kw Chinese Spindles - Info, Setup and Advice + More !
FYI 2.2k spindles and vfd are back in stock in the uk. Price has dropped too.
Re: The Common 2.2Kw Chinese Spindles - Info, Setup and Advice + More !
Thanks r0bsk1 for posting this I will check eBay now.
Regds
Mike
Re: The Common 2.2Kw Chinese Spindles - Info, Setup and Advice + More !
Damn my hastiness, I bought the cheapest one from aliexpress a few days ago and it was £8 (plus £1 bank charge) more than they're now selling them in the UK on ebay. Plus the seller has dispatched it with FedEx even though I chose DHL as the courier, so now I'll get a nice admin charge from them. Oh well :boxing:
I'll post again when it arrives :courage:
Re: The Common 2.2Kw Chinese Spindles - Info, Setup and Advice + More !
Hi guys. What do I go for a four bearing one from uk or 3 bearing one from chai?? I can't decide
Re: The Common 2.2Kw Chinese Spindles - Info, Setup and Advice + More !
Still looking at spindles on eBay and unsure. Had a good price off chai but with shipping takes it up a fair bit.
There's one via solar.jean which I am tempted by, is a four bearing model but only has a 3 pin connector. Is this an issue? Can an earth still be fitted - does it need one?
Re: The Common 2.2Kw Chinese Spindles - Info, Setup and Advice + More !
Quote:
Originally Posted by
Danielroyal25
There's one via solar.jean which I am tempted by, is a four bearing model but only has a 3 pin connector. Is this an issue? Can an earth still be fitted - does it need one?
You could easily change it for a 4 pin connector, or just fasten the earth cable to the spindle body via the spindle mount or tapped hole in the Z-axis, assuming they're all metal.
The 3-pin connector may imply it's an older spindle, since in the past these spindles used to exclusively use 3-pin connectors. Clearly that's just speculation though...as I've already mentioned, my spindle with 3-pin connector from solar.jean has been good and does include 4 bearings.
Re: The Common 2.2Kw Chinese Spindles - Info, Setup and Advice + More !
just buy it!. it'll be fine.