Re: Auto zero Z axis problems
Understand that is very old thread, but can somebody post final version with step by step instruction please?
Ideally with travel to tool position and 2 stages (1st touch, retract and fine touch)
I believe for many of you this is piece of pi...
Thanks
Re: Auto zero Z axis problems
Quote:
Originally Posted by
Tom J
Understand that is very old thread, but can somebody post final version with step by step instruction please?
Ideally with travel to tool position and 2 stages (1st touch, retract and fine touch)
I believe for many of you this is piece of pi...
Thanks
If your not into writing VB basic code or screen designing then Don't mess around Tom just buy Gerry's screen set it's worth every penny.
Re: Auto zero Z axis problems
Quote:
Originally Posted by
JAZZCNC
If your not into writing VB basic code or screen designing then Don't mess around Tom just buy Gerry's screen set it's worth every penny.
I'll second that, best $20 I've spent in a long time...
Re: Auto zero Z axis problems
Unless you have a specialised screen set or don't like Gerrys screen set.
Re: Auto zero Z axis problems
Quote:
Originally Posted by
John S
Unless you have a specialised screen set or don't like Gerrys screen set.
Trust you to throw spanner in the works.!! . . . . Better get coding then or ask friend nicely and he might give you some code.:encouragement:
Re: Auto zero Z axis problems
I do not mind buying that, considering that already managed stub the hole on my new sensor:grumpy:
Where can I find description/link please?
Re: Auto zero Z axis problems
http://www.thecncwoodworker.com/2010.html is the link 😁
Sent from my HUAWEI VNS-L31 using Tapatalk