Re: Pks-digiplan sd2 driver IC help please
Unbelievable!
I do not know many people capable of finding this without data.
I am not an experienced service person but I like dealing with stuff like that.
Saves money as well.
kind regards Swarfing!
ps I hope to see you in my next thread starting tonight.
3 Attachment(s)
Re: Pks-digiplan sd2 driver IC help please
Attachment 8565Attachment 8566Attachment 8567Hi Asto, this is a bit strange.
I've posted some pics of an SD2 with a CD20 next to it. The cd20 has another board in the centre of the two heatsinks which is removed to show the main board, this board has four leds on the left hand (rear) edge.
The Denford Orac used both types of drive, the cd20 version has a higher voltage psu (around 65v-80v), and the sd2 version has a 35v ish psu.
Re: Pks-digiplan sd2 driver IC help please
i2i...the second pic from left to right and the 4rth are pretty similar to mine almost identical but i see the white plastic socket contains three lines of contactors. Mine has two connecting the main board where the high power transistors are with the signal processing board where the logic ic's are located and the leds are on this one the one on the top. You re right!
The first pic that i sent was borrowed from the internet not real mine...So it looks you have some point here.
The one with the exposed PKS0320 was taken by me few days ago.
I can send you new photos that i can have from my machine tomorrow.
The first board though which i see must have come off a Triac mill. My Triac uses them because I can see the driver ic there covered under the flat springs. It is the L298. I had to replace this once.
cheers
Re: Pks-digiplan sd2 driver IC help please
The Triac does use the sd2 drives on the x and y axis, and an sd3 on the z axis. This is on models up to the early 90's, and then they changed them to the sd12/13 drives.
Is your Triac one of the green ones with the open frame or a mixed white and green one?
Re: Pks-digiplan sd2 driver IC help please
Yes right! The green one.
But painted Grey.
An old open machine from the 80's.
i2i...Do you want to sell any of these boards?
cheers
Asto
Re: Pks-digiplan sd2 driver IC help please
lovely machines the old ones i prefer the 3 phase spindle motor to the dc motor on the newer models, but such a shame they came with the r8 spindle nose. The newer ones have a 30 spindle that allows the bt30 tools and an atc.
Now a mod to use the r8 spindle and convert it to a 30 taper and atc would be handy.
My stock of cd20s are to backup my 2 Denford Quatros and my easiturn, they are quite hard to get hold of and that's not going to get better, so sorry i'll not be parting with any.
My apologies if i came over a bit high handed in earlier posts.
Re: Pks-digiplan sd2 driver IC help please
i2i, just as an independant observer, you did not come over as "high handed" in your posts, just as someone who knows what he is talking about!!! G.
Re: Pks-digiplan sd2 driver IC help please
Quote:
Originally Posted by
i2i
lovely machines the old ones i prefer the 3 phase spindle motor to the dc motor on the newer models, but such a shame they came with the r8 spindle nose. The newer ones have a 30 spindle that allows the bt30 tools and an atc.
Now a mod to use the r8 spindle and convert it to a 30 taper and atc would be handy.
My stock of cd20s are to backup my 2 Denford Quatros and my easiturn, they are quite hard to get hold of and that's not going to get better, so sorry i'll not be parting with any.
My apologies if i came over a bit high handed in earlier posts.
...My Triacs are not R8 machines I have two of them. One was built in 1985 and the other 1987. The newer I bought from G and m tools but Z axis failed after a while.Thought it was the stepper motor and replaced that with new Sanyo. Then I found the L298 dead.
Replacing this IC was not that easy in double sided board.
Sorry about the first picture. It was not taken from my machine. You were right.
cheers
1 Attachment(s)
Re: Pks-digiplan sd2 driver IC help please
Quote:
Originally Posted by
Swarfing
I used to work for motorola in a past life. It was common for them to disguise parts like Irving said. They would always use part of the original data in the name though so it was just a case of searching using PKS and 32.
Attachment 8644
This isn't a drive question but, again this module(Parajust single to three phase inverter) carries coding which is not common for TO-3 Motorola transistors.
cheers
Re: Pks-digiplan sd2 driver IC help please
Educated guess... 2SC901 NPN,.... if PNP then maybe MJ901 darlington (but doubt that)
Quote:
Originally Posted by
asto
Attachment 8644
...Then I have another one for you Swarfing..
This isn't a drive question but, again this module(Parajust single to three phase inverter) carries coding which is not common for TO-3 Motorola transistors.
Can you tell what type these transistors may be?
cheers