Hi No sorry we dont do things like that here, if you want the software you will need to go and buy it like everyone else.
Printable View
really nice software
usb cnc i get my licence
i build the pcb its very easy to build it
from
http://www.planet-cnc.com/
im from tunisia if some 1 need more info contact me
Hi, im new here,
i need to build one,
if i build the board, buy the pc software,....how can i program the PIC-ic ? is the IC program free? its in *.bin or *.hex
where can i get one?
to program the PIC you need a programmer and you can download the firmware for the PIC for free from the planet CNC site. Programmers cost between 20 and 50USD on ebay, the cheap ones plug into a parallel port, the more expensive (like microchip's PicKIT2) are USB.
Or you can by the PIC ready programmed for 11Euro and since you are buying the software this would be the easiest and cheapest way to do it...
Hi Andrej
I have a Proxxon MF70 that I cnc'ed using a usb controller (4axis mk 1 I think) and generally i have been very happy with it and the software. I have a problem with G2 and G3 circular interpolation. No matter what I do I seem to be only able to make a quarter circle from say x0 to x10 y0- y10 with a 10mm rad. To go from x10 - 20 y10 - y0 10mm rad is mostly ok but going from x20 - x10 y0 - y-10 and
it starts making snake patterns and looses location of 0 datum point. I don't have any problem doing very detailed engraving and linier interpolation. Hope you can help.
Phil Gravett (Philcraft Steam)
Hi
Please send your .settings and problematic g-code to my email.
Andrej
Grbl with stm32 is working good . But u need skills to program it and electronics to make board .